Premier Cable CANBus DeviceNet Male Terminator 120 ohm
Premier Cable DeviceNet Trunk cable Terminator Resistor
Premier Cable MINI 5 Pin Male Terminator devicenet
Premier Cable DeviceNet Mini-C Terminator Resistor
Premier Cable DeviceNet Terminating resistor
Premier Cable Devicenet 5 Pin Terminator
Mini-Change Connectors are the standard by which all miniature connectors are measured. Delivering optimum conductivity the Mini-Change series offers the best selection of miniature connectors in the industrial market. These connectors provided the first quick-connect alternative to hard-wiring.
DeviceNet and NMEA 2000 network protocol 7/8 5P female plug termination resistor fieldbus
Fieldbus DeviceNet and NMEA 2000 protocol cable 7/8 5-core female plug terminal resistor male terminal resistor
Two terminating resistor connectors are required on each NMEA 2000 network, one at each end of the trunk line. Like the double-terminated cord set, the waterproof-designed terminator connector continues to function even when submerged in a bilge.
7/8 terminating resistor connectors are connected to both ends of the backbone cable to reduce reflections of communication signals in the network. If you do not use terminating resistor connectors, the network will not operate correctly. Usually the terminating resistor is connected directly to a T-connector on the trunk line, but it can also be connected to a line group extending from the T-connector. Coaxial terminating resistor connectors can also be used, which are used to terminate the network at a product.
The NEMEA2000 communication protocol standard of the American Marine Electronics Association is applicable to the fields of ship sensors, navigation and display devices. It is compatible with the CAN-BUS controller LAN communication protocol standard of automobiles and internal combustion engines. Please refer to DeviceNet wiring specifications and connection design solutions.
NEMA2000 series connectors mainly develop 7/8-inch Mini 5-core connectors for thick cables (18AWG) and M12 5-core connectors for thin cables (24AWG). The connector wiring is a standard ODVADeviceNet structure, that is (2C Power cord + 1 pair of signal twisted wires + AL aluminum foil + ground wire + braiding), there are two types of wire insulation options: TPU and PVC. The default color is black, gray or purple RAL4001. The design and development of the entire product considers cold resistance, high temperature resistance, Water and alkali resistance, oil resistance, corrosion resistance, UV resistance, wear resistance, plug-in resistance and other strict application environment requirements.
Premier Cable DeviceNet Trunk Terminator Resistor with Mini-Change
Premier Cable DeviceNet Mini-C Termination Resistor
Premier Cable Mini Male NMEA2000 Terminator
Premier Cable NMEA2000 Mini Terminator
Male or Female
DeviceNet Terminating Resistor MINI-7/8
DeviceNet Mini-Change Terminator Resistor
Termination resistors are used to terminate both ends of the trunk line
Termination Resistors are required on a NMEA 2000 network and are placed at each end of a network trunk cable.
DeviceNet Mini-C Termination Resistor Male or Female can be used at the end of a run of Mini-C DeviceNet cable. With screw-on connectors, there is no hassle with the installation. So simple to use that they literally install in seconds.
Premier Cable NMEA2000 Mini Bulkhead feedthrough connector
Premier Cable Mini-C Bulkhead Feed-through Receptacle
Premier Cable Mini-C Bulkhead Feed-through connector
Premier Cable 7/8" feed-through panel connector
Mini-Change A-Size Bulkhead Pass-Through Receptacle, Female Straight, 4 Pole, 7/8"-16 UN-2A Mounting Thread
Mini Bulkhead Feed-Thru
Mini Bulkhead Feedthrough
NMEA2000 Mini Bulkhead feedthrough. For Mini NMEA2000 cables passing through a bulkhead.
The bulkhead Feed-Thru allow ease of installation through panels or bulkheads and establishes future connection points in a network installation. The bulkhead feed-thru also maintains the integrity of watertight bulkheads by providing a waterproof seal and connections
Molded key indicator allows for quick and easy alignment and mating of the connector,Features rugged keyways for positive alignment of connections, Waterproof rated to IP68
Audited Supplier 
){kind=link}