| Customization: | Available |
|---|---|
| Interface Type: | M12 Connector |
| Operating Frequency: | Low Frequency |
|
Still deciding? Get samples of US$ 12/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The Lowrance Yamaha Engine Interface Cable connects directly to the NMEA 2000 connector under the engine's cowling.
With the engine interface cable, you can connect motors directly to your Lowrance NMEA 2000 network without a CommandLink Plus system. The connector cable has an NMEA 2000 network T-connector. Check compatibility with your motor before purchasing.
Features
• Cable length 3.6 m or customized
• T-connector
• Micro-C standard connector
• Requires LAN instrumentation
4-Pin Data Connector. Works with NMEA 2000-Compliant GPS / Chart-Plotting units. Connects directly to the NMEA 2000 connector under the engine's cowling. Connects to Yamaha engines without Yamaha CommandLink or CommandLink Plus systems. The boat must have at least a basic NMEA backbone (Starter Kit) installed for the cable to interface with the GPS unit.
Fitment: For Yamaha
2006 - Now : F50, T50, F60, T60, F75, F90, F115, LF115, F150, LF150, F200, LF200, F225, F225, F250, LF250.
2006 - Now : Z150, LZ150, VZ150, Z175, Z200, LZ200, VZ225, Z250, LZ250, VZ250, Z300, LZ300, VZ300.
Including SHO models as well
Outputs:
Yamaha| 4-stroke 50-250| 2-stroke HDPI 150-350
RPM
Alternator Voltage
Engine Hours
Engine Temperature
Fuel Pressure
Fuel Rate
Oil Pressure
Trim
Water Pressure
Specifications
| Product name | Navico Yamaha Engine Interface Cable for NMEA2000 |
| Connector Type | speedboat outboard engine interface NMEA 2000 5pin T Connectors |
| Protection | IP67 |
){kind=link}